PonyProg STK200 AVR Programmer Description

The PonyProg STK200 AVR Programmer is buffered to protect the ports and to give a little integrity to the signal. With the 74HC125 it can drive a longer cable than an unbuffered programmer, although the cable length still needs to be no longer than a foot or so. This programmer is an STK-200 with the addition of an LED, which is used by avrdude to tell us when it is programming.

PonyProg STK200 AVR Programmer Schematic

PonyProg STK200 AVR Programmer schematic

Search Site Help
Search Results X
Search Help X
  • word1 +word2 causes the engine to search for pages having both words.
  • word1 word2 causes the engine to search for pages having either word.
  • word1 -word2 causes the engine to search for occurences of word1 not accompanied by word2.
  • "word1 word2" causes the engine to search for occurences the phrase "word1 word2".
  • The ENTER key causes the search to begin.
  • The Search Results dialog contains links to all found pages.
  • The Search Results dialog (like this one) closes when you hit the ESCAPE key.
  • Words shorter than 5 letters are not stored (sorry).